Yakamoz 300W Mini Heat Gun DIY Electric Nozzles Tool Hot Air Gun : Small compact heat gun, ideal for 3D printing work or some other craft work

Straightforward to use, excellent value and does what it should effectively. . I acquired this for use with some solder seal heat shrink connectors i bought for some electrical do the job i have carried out recently. This heated up promptly and easily shrank the connector and solder on my cables. With how simple it was to do i can not believe that i haven’t opted for one of these and the heat shrink connectors ahead of. It really is simple to use, just switch it on and level it, and has a helpful small stand created in for when it really is hot/cooling. I can visualize several far more makes use of for this together with for craft so this has undoubtedly been a great purchase.

Straight out of the box it looked a actually qualified merchandise. It is compact, light-weight, uncomplicated to hold, silent in procedure, and fitted with an integrated stand. I ordered it for heat shrinking tubing and so significantly it has executed perfectly.

Yakamoz 300W Mini Heat Gun DIY Electric Nozzles Tool Hot Air Gun for Embossing, Drying Paint – Black

  • Made of ABS plastic material, simple and durable. Dimension: 240*50mm / 9.44*1.97in.Working temperature: 200℃ – 300℃
  • The temperature can not be adjusted, but it can reach at 200 degree within a few seconds.
  • Easy to use. Just keep 5-6cm distance from your amazing work and to heat it about a 45 degree angle until completed
  • After completion, use the heat gun at high temperature to blow a few minutes, it not only can add its hardness, but also its brightness
  • Perfect for Embossing, Drying Paint & More for DIY/Fixed Shape/Clay/Shrinking Gift Wrap

Terrific heat gun its in fact a bit bigger than i imagined from the image, if you are utilised to united kingdom plug dimensions. Use the plug in the picture as a far more reasonable dimensions manual. I obtained this heatgun exclusively as a tool for heat shrink tubing in motorbike/car or truck use. The electrical power lead is a little on the small dimensions, i’m guessing a metre or so. Its easy to use and good for apps with confined area. Overall i assume its good worth, arrived rapidly & the sellers appear to be to be great & not worried to preserve you up-to-date.

Does what it ought to and does it nicely. . I acquired this heat gun due to the fact i have a whole sized one particular that wanted to have its have box and i just required a thing a little bit more transportable that i could carry in my toolbox. It is perfect for heat shrinking electrical cables and pcbs and heats up in just a handful of seconds. I can not fault it, it merely does what it need to.

This is effective properly, must extremely on sink tubing should really have purchased before would have saved fingers from soldering iron.

Yakamoz 300W Mini Heat Gun DIY Electric Nozzles Tool Hot Air Gun for Embossing, Drying Paint – Black : Very good product for hobyists. I use it for plastic model building to make the biggger peices more pliable when fitting together, saves me using my wifes hairdryer. Keep well away from children.

This does exactly what i wanted. I manage an right after faculty club and this was purchased to dry embellished ceramic tiles so the young children could choose them dwelling. Saves needing an oven to dry them.

This is an outstanding item. I’m an electrician and use it for. This is an outstanding product. I am an electrician and use it for conduit. Only use a couple of minutes at a time- aside from that it can be great- propose it-.

It was larger sized than i thought but it was effortless to manage and it was straightforward to manipulate i. I was rather amazed when it arrived it was larger than i considered but it was effortless to handle and it was quick to manipulate i made use of it for heatshrink tube on electrical cable it was exceptional i also applied it on bending some plastic that was outstanding as nicely up to.

This is effective properly, must extremely on sink tubing should really have purchased before would have saved fingers from soldering iron.

A pretty awesome tool, transported swiftly. I introduced it principally to heat up glued sections of my telephone so i could take the cellphone aside. It was straightforward to use and take care of. I’ve given that applied the tool to shrink plastic and it is wonderful and exact – you only heat the bits you want to. It undoubtedly operates far better than placing the plastic in the oven. I made use of it to generate the bees in the photo.

Modest compact heat gun, excellent for 3d printing perform or some other craft work. Overview***********i do a large amount of 3d printing and most of this is for big assembly robotics do the job. Usually most big prints require 3d printing areas of merchandise and fitting them together a bit like a jig observed, the only difficulty is that the precision of each and every print can range at any time so a bit and as these kinds of the parts really don’t often fit jointly as simply as i would like. Now i are likely to 3d print in pla (polylactic acid) filament and this is quite powerful, but also brittle, so attempting to pressure items together does at occasions guide to cracks or breaks, thus a heat gun allows me to heat up the pla and this tends to make slotting jointly a great deal a lot easier as the pla is a thermoplastic so can be melted and then will re-harden after. So a friend lent me a heat gun, and nevertheless it heated the plastic, i just did not have any control of the volume of heat, and spotted this small compact heat gun on amazon. I requested it and have been utilizing it for almost a week. Utilization********i’ve printed many components of styles out (around thirty) and uncovered the heat gun an invaluable tool :)nevertheless the energy lead is shorter than i would have hoped (only one metre), its continue to a actually valuable merchandise. The heat is plenty of for the plastic, in fact it is really good as its controlled and can be focused as its a more compact nozzle (nozzle is all over 13mm in diameter), so i can goal it at small joints. I identified that if i keep it too prolonged on a part, it really does soften the plastic quickly, so use gentle sum of heat and then test and in good shape the components. The tiny change at the back again is in a very good location to change the gun on and off, and the stand though little does keep the nozzle off my desk (however the nozzle has plastic all over it which is great so i you should not burn my desk)i hope you could have uncovered this overview helpful, and the image included, but if you want to know everything in unique be sure to comment beneath and i will do my ideal to response it.

I have just got into fixing tablets and phones, and owing to the require of a heat gun to support with the elimination of screens and many others, i determined on this unique gun. Past critiques had been good so i went forward and acquired it. Very delighted with it without a doubt, it does what it suggests ‘on the tin’ and does not disappoint in any aspect. I am sure i will use it in other spots as well so overall, a extremely very good obtain.

Great minor performer – you are going to want you experienced bought 1 sooner. Properly, there were being enough favourable evaluations to make this an effortless ‘try’ and this minimal child did not disappoint. :¬)i have been working with this minimal cigarette lighter run ‘blow torch’ with a tiny mesh conclude that stops the flame and results in a glowing factor – it has usually performed a acceptable occupation but one. The refills are uncomfortable/messy and of class you have to have the can of fuel prepared and they are not all that low-cost and then two. There is the fact that for rather a though afterwards, you have a really real fire hazard until eventually the matter has cooled down. This very little heat gun got up to the operating temp in seconds and cooled down rapidly – it did a wonderful position and was really quick to keep and when i needed to place it down, the minor relaxation/help labored a treati am an ex-electronics engineer and cn extremely propose this – i would be tempted to say that the only dilemma is ‘how very long will it previous?’. But at such a fair value, it will not have to previous extensive to be much better price than the refillable fuel kinds or some of the way a lot more expensive kinds out there.

It is really a great little heat gun. It truly is a fantastic very little heat gun. Nothing as well amazing, but it seems to be realistic good quality, and has produced fitting heat-shrink a breeze.

Wonderful price and great product. I necessary a heat shrink gun for some small electrical operate. This was ideal for the position and i am certain it will assistance me properly in the long run. The gun suits properly in my hand and is simple to use- just change it on, hold 4-5 cm absent from your project or heat shrink and let it do its function. You do not want fuel and the heat is consistent working at all angles. The construction is of both of those plastic and metallic and has a neat fold away stand that can be utilized although the heat gun is cooling or for standing when you go your venture in entrance of it. The price tag is great for this products and does appear properly packaged with directions. Quite pleased with y selection and can not wait around to use on my next project.

Acquired exclusively to take away a broken ipad mini display it was best. Its dimension makes it uncomplicated to use and manoeuvre and the crafted in stand implies you can pop it down whilst you swiftly do the upcoming task. A longer energy cable would be helpful but not the close of the planet.

Great minor performer – you are going to want you experienced bought 1 sooner. Properly, there were being enough favourable evaluations to make this an effortless ‘try’ and this minimal child did not disappoint. :¬)i have been working with this minimal cigarette lighter run ‘blow torch’ with a tiny mesh conclude that stops the flame and results in a glowing factor – it has usually performed a acceptable occupation but one. The refills are uncomfortable/messy and of class you have to have the can of fuel prepared and they are not all that low-cost and then two. There is the fact that for rather a though afterwards, you have a really real fire hazard until eventually the matter has cooled down. This very little heat gun got up to the operating temp in seconds and cooled down rapidly – it did a wonderful position and was really quick to keep and when i needed to place it down, the minor relaxation/help labored a treati am an ex-electronics engineer and cn extremely propose this – i would be tempted to say that the only dilemma is ‘how very long will it previous?’. But at such a fair value, it will not have to previous extensive to be much better price than the refillable fuel kinds or some of the way a lot more expensive kinds out there.

Straightforward to use, excellent value and does what it should effectively. . I acquired this for use with some solder seal heat shrink connectors i bought for some electrical do the job i have carried out recently. This heated up promptly and easily shrank the connector and solder on my cables. With how simple it was to do i can not believe that i haven’t opted for one of these and the heat shrink connectors ahead of. It really is simple to use, just switch it on and level it, and has a helpful small stand created in for when it really is hot/cooling. I can visualize several far more makes use of for this together with for craft so this has undoubtedly been a great purchase.

My heat gun arrived perfectly packed and quicki have made use of it two times so much and did the task quite nicely in these difficult to get at placeswhich is why i bought it heats up instantlyand i am properly happy with the productbob.

This does exactly what i wanted. I manage an right after faculty club and this was purchased to dry embellished ceramic tiles so the young children could choose them dwelling. Saves needing an oven to dry them.

My heat gun arrived perfectly packed and quicki have made use of it two times so much and did the task quite nicely in these difficult to get at placeswhich is why i bought it heats up instantlyand i am properly happy with the productbob.