WEP 2in1 Soldering Iron Desoldering Station Hot Air Rework Gun 700W LED Display Lead Free, Excellent soldering center

Doing the job terrific, made use of to remove 28 pin soic packages with simplicity.

Really great sturdy item and really effortless to regulate warmth.

Able finances soldering station. This is my to start with temperature controlled iron, just after working with an old antex for longer than i care to keep in mind. I generally like to obtain brand instruments, but soon after a large amount of investigate, i determined that this a person would be worth a try for £37. Supply was forward of plan and it was well packaged. It has a molded uk plug with a reliable earth and a 5a fuse. According to the instruction sheet, it is rated at 75w. Every little thing seems nice and solidly produced, with no discernible sounds from the transformer and it has the sense of a branded products. It arrived up to temperature really immediately. I cannot ensure the accuracy of the temperature readout, but i took the precaution of starting off at a reduce temp and slowly but surely turned it up to a workable temp and it was absolutely in line with what i would anticipate. A person of the nice things about these generic irons is that there look to be plenty of spare areas for them, so if nearly anything does break it can be cheaply repaired.

Key specs for WEP 2in1 Soldering Iron Desoldering Station Hot Air Rework Gun 700W LED Display Lead Free with 3 Nozzles:

  • 640W High quality Hot Air Rework Station with digital Display.
  • Fast heat up,rapid temperature recovery and stable by Advance PID technology.
  • Digital display shows real-time temperature
  • Smart sensor in hot air gun which detecting pickup or lay down.
  • Overheat protection and CE approved

Comments from buyers

“Good quality tool, Works very well., Does the job for a low price, good for the hobbyist.”

Amazing excellent for the selling price. I do not know how this compares to skilled soldering stations, but it can be leagues above my old draper 25w soldering iron. The build high-quality and complete is actually extraordinary. It heats up in a number of seconds and would make life so much less difficult. At £40 it can be an absolute no-brainer. I wish i would bought just one yrs in the past.

Doing the job terrific, made use of to remove 28 pin soic packages with simplicity.

Nice products, im now a joyful solderer.

I am just a pastime user but got sick of the regular garbage but don’t want to devote hundreds. The first impressions are really superior. Has a heft to the device and high-quality feel. The control knob has a extremely good sleek really feel the iron by itself is awesome and mild with a good bit of cable on it. I have only used it a very little so considerably and the temperature management is terrific. The iron has a top quality ceramic component and the suggestions healthy incredibly securely. And you actually get some recommendations not like much more high priced employment.

Arrived properly and before than expected. I’ve checked it will work and cannot wait around to get developing kits and circuits. I hope it lasts though there are plenty of spares accessible on the world wide web if required.

Arrived quickly, effectively packaged and as explained. The solder iron stand was broken on arrival but this is not an challenge for me as i have an additional iron stand on my bench by now. The soldering iron is good (only one tip although, would have been good to have a pair of diverse styles and spares in the box. They seems to be widely obtainable nevertheless). The iron is temp managed and is effective perfectly plenty of. I only plan to use the iron as a secondary. The hot air station performs excellent, heats swiftly and is quite controllable. It is very and nice to use.

Fairly very good soldering station. Great and low cost soldering station. Are not able to suggest sufficient for pastime electronics. Can solder rather considerably everithing which includes smd.

The 3 in one operates very well and heats up quite quickly.

The 3 in one operates very well and heats up quite quickly.

Could do with smaller air gun nozzle suggestions and spare iron tips if not pretty satisfied.

Very flexible piece of kit.

Really great sturdy item and really effortless to regulate warmth.

Extremely impressed with this soldering station. It really is very well created fantastic attributes like the more suggestions and silicon cable. I was kinda expecting low cost crap at this value but it is an superb products.

Excellent merchandise value and supply advocate seller , will use again.

Nice products, im now a joyful solderer.

Almost certainly the finest price for income – in addition it performs excellent. Several points make this solder station truly worth spending the more 10 quid (there is a more cost-effective just one). 1) dial controls – this give far more direct, speedy management in excess of the warmth and airflow, relatively than pressing + or – buttons quite a few situations – primarily when earning drastic changes2) ce certification – this a person will work beautifully, and i analyzed for leakage current, and it truly is fantastic (some of the much less expensive types are not ce accredited, and have even had grievances from consumers indicating that they tripped their lights). 3) normal 22mm nozzle size implies you can order added nozzles4) auto amazing down when switched off signifies for a longer time aspect lifepractically, i located that this is not actually suited for solder perform of e. Wires – i still use my trusty weller 100w gun for that. This is, however, excellent for reflow function, and soldering ics that are much too delicate to be soldered with e. A gun (emf can wipe the chip) or immediate heat (the pins take in the warmth and overheat the chip on the inside of). Bottom line: fantastically good for reflow of boards or soldering of chips not fantastic for fresh soldering of heavier products these types of as wires.

I have achieved extra than i envisioned to even down to qfn package assembly.

I am a specialist person so i will give my thoughts on the hot air tool. I purchased this to take out a dram chip. The hot air ‘gun’ is way too large to be ready to deal with quickly for high-quality operate this kind of as this. The smallest nozzle in the kit is however too large for high-quality perform, it would be better if the kit experienced a really smaller nozzle. There is lots of airflow but the unit does vibrate very well from the inbuilt air pump. It really could do with vibration absorbing toes equipped as standard. There is plenty of warmth readily available and this is quickly adjustable. The device is good for removing devices off the pcb because of the abundance of offered hot air but is not so great when making an attempt to solder components into place. A smaller sized pencil like hot air instrument would have been a much better buy. I’ve determined to acquire however another soldering iron, this time a miniature kind with a range of micro ideas.

Excellent hot air station unaffected by nozzle sizing simply because it works by using a diapgam pump. I now would like i experienced procured the mixture solder iron hot air gun from the exact people today.

Very fantastic basic soldering station. This is just what i essential for my interest electronics. Much better than a simple iron but not above the prime with unnecessary skilled capabilities. Are not able to verify thatthe temperature is particularly as per the led display but it performs nicely with the skinny lead based solder i use.

Rapid startup, quiet and does the task.