Teng TTID20 40910 Ind Impact Driver Set Drive : seriously a 30 quid tool and you ship it

Great simple tool, got me out of a situation.

It’s a shame that i can’t give this one 5 stars as usually teng pieces are good. The packaging for a start feels cheap and. Hmm, it’s a shame that i can’t give this one 5 stars as usually teng pieces are good. The packaging for a start feels cheap and cruddy, which is not the case for other teng tools, and though it isn’t hugely important to the functioning of the tool, it doesn’t give the same ‘wow-they-even-took-they’re-time-to-make-the-packaging-good’ feeling which you should expect when you pay teng/bahco/proxxon prices. This is the first tool from any of those suppliers where i’ve been underwhelmed by the packaging: in fact, the plastic tray insert is so flimsy that mine arrived broken with the bits rolling around in the bottom of the box. The tool itself is good quality, it feels about half as heavy again as the cheapo clarke one that it was replacing. As far as the driver itself goes, i have no complaints – it works well and when using it i feel confident it will last a long time. The area where this really falls down though, are the bits. There are 18 of various type and size, but if like me you work on a few different things (cars and bikes etc) then you’ll need to supplement the set. What isn’t ok is the quality of the bits, i hope mine was a manufacturing fault and not par for the course, but when trying to remove a stubborn size 6 hex bolt, the hex bit sheared, leaving half in the recess of the bolt head and half in the impact driver. I’ve never seen a bit shear when used with an impact driver before. I was annoyed but not overly bothered because i could get both pieces out and thought i could get a replacement under the famous, no quibble, teng lifetime warranty. I checked on the teng site to see what paperwork i would need to fill in and on reading the terms of the warranty, only the mechanism is covered – sockets and bits etc are considered “consumables” and not covered under the warranty. I took it down to my local teng dealer to see if they could sell me a replacement – they replaced it foc and without asking for any receipt etc, though i suspect that is a more a credit to them (a local independent) than it is to teng.

Teng seriously a 30 quid tool and you ship it. Teng seriously a 30 quid tool and you ship it in a box this brocken when it arrives?.

Does exactly as it says on the tin, good selection of bits and good case.

  • The box is a bad joke and no amount of bubble-wrap would have prevented
  • Good impact driver, bits not so good
  • Brilliant tool once again from Teng Tools

Teng TTID20 40910 Ind Impact Driver Set Drive

  • Impact driver set
  • ½ inch drive
  • Supplied with adaptors and most common bits
  • Complete in a storage case
  • For individual use or as part of Teng Tools storage system

Seems a substantial bit of kit, with a good range of bits (and a standard adaptor, so bits from a normal drill set can be used as well. Has r & l stamped on the shaft: when you turn it to r note that it stands for right, not reverse.

It has good selection and it works.

Good quality set as always from teng in tool tray to add to your teng tool box.

Good impact driver, bits not so good. Very good set, but the t30 bit has twisted after some heafty use – had to buy a replacement. Actual driver and holder very strong and will last for ages, certainly will outlast the bits.

Excellent impact driver but tips are a bit on the soft side for impact work.

Perfect quality from teng, i have used them for many many years without any problems. Bought these for one specific job which would have been impossible without them. Arrived when expected, well packed and on time.

Very good but limited units.

Deliver excellent, packaging good, careful when you hammer as the “bits” are hardened. They will shatter with too hard an impact, lighter blows and patience will get you there.

Excellent impact driver but tips are a bit on the soft side for impact work.

Seems a substantial bit of kit, with a good range of bits (and a standard adaptor, so bits from a normal drill set can be used as well. Has r & l stamped on the shaft: when you turn it to r note that it stands for right, not reverse.

The best hand impact driver. This is a great tool, really good feel to it and through many operations it has never missed.

Very good but limited units.

The box is a lousy joke and no amount of money of bubble-wrap would have prevented. The box is a negative joke and no volume of bubble-wrap would have prevented one hinge snapping on opening. I shall decant the contents into a brown-paper bag for protection. The resource is fine but assure you know how to use it. Specially, the bit will have to in good shape properly or the generated torque will snap it. Torque must be utilized in the wanted path right before impact. Eye security is necessary. I am declaring all this as there are no guidance.

Excellent instrument but what is up with the flimsy storage box. . The storage box is quite flimsy and broke upon very first opening, really strange specified the excellent of the instrument. In any case i am storing the resource and bits in an previous tin but have diminished the rating by 1 star owing to the storage box bundled.

For a non skilled use this is fantastic, i have no thought how it would perform underneath heavy use, i necessary only two times.

Outstanding device after yet again from teng instruments. Brilliant instrument once once more from teng tools, the device alone is nicely created and good to get the job done with. The screw bits are good top quality and haven’t experienced one shattered on me nevertheless. Utilizing this device to undo screws on brake discs and does the occupation properly. The scenario is just not remarkable, but your buying the device not for the tiny circumstance it will come in.

Produce outstanding, packaging very good, cautious when you hammer as the ‘bits’ are hardened. They will shatter with also really hard an impact, lighter blows and patience will get you there.

Perfectly manufactured, takes a good pounding.

One thought on “Teng TTID20 40910 Ind Impact Driver Set Drive : seriously a 30 quid tool and you ship it

  1. This review is from : Teng TTID20 40910 Ind Impact Driver Set Drive

    Good quality and range of the bits only one down side box itself looks cheap and flimsy.
      1. Brilliant tool once again from teng tools. Brilliant tool once again from teng tools, the tool itself is well made and great to work with. The screw bits are good quality and haven’t had one shattered on me yet. Using this tool to undo screws on brake discs and does the job nicely. The case isn’t amazing, but your buying the tool not for the little case it comes in.
  2. Brilliant tool once again from teng tools. Brilliant tool once again from teng tools, the tool itself is well made and great to work with. The screw bits are good quality and haven’t had one shattered on me yet. Using this tool to undo screws on brake discs and does the job nicely. The case isn’t amazing, but your buying the tool not for the little case it comes in.
    1. Should last a lifetime with my occasional use. Bought to remove 11 yr old torx screws from mondeo rear hubs. I was expecting to visibly see the screws turn. They didn’t but when i got the wrench back on them they come out fairly easy so guess impact driver had freed them up.
  3. This review is from : Teng TTID20 40910 Ind Impact Driver Set Drive

    Should last a lifetime with my occasional use. Bought to remove 11 yr old torx screws from mondeo rear hubs. I was expecting to visibly see the screws turn. They didn’t but when i got the wrench back on them they come out fairly easy so guess impact driver had freed them up.

Comments are closed.