Silverline storm 128999 – 900W Biscuit Jointer 230V – Well its good for a cheap machine and saves setting a cutter

This is a relaxed tool to use, little or no vibration, uncomplicated to position and slash correct biscuit joints. There are guides for depth of plunge cuts and posiotioning on the facial area of the timber for jointing, even though the guides search approximate fairly than absolutley accurate, but it id definitely workable. It cuts at ninety levels to the edge and has an angle fence for other angles. It comes with two spare bushes. All-in-all, good value for dollars.

A fantastic software that i have applied on numerous employment though. A fantastic device that i have made use of on many jobs whilst fitting kitchens to splice kick boards and doors to corner trim. You get what you spend for so likely not good enough for a qualified as the guides and many others are quite much worthless, however, it is straightforward more than enough to line up by eye. If you have a handful of work to do that want a biscuit jointer obtaining this with a pack of biscuits would be greater than selecting. A practical instrument to have in your collection.

I know the previous adage of you get what you shell out for, but in some cases you pay back a lot less for a good product or service. I also know that many other manufacturers of this form of tool will be shinier and heavier and nicely, far better. For a quarter, if not far more, than quite a few of these brands (most of which are made in the identical spot/factories and so on) this is nicely, damn superior. It could not be the best in unique, scarce circumstances but generally it will do what you need. I do not know how long it will very last and i could regret my text but, for now.Here are the specifications for the Silverline storm 128999 – 900W Biscuit Jointer 230V:

  • For hard and soft woods
  • Aluminium fence angle range 0 degrees to 135 degrees
  • Clear easy to read diameterls and lock-off button
  • Dust extraction port with dust bag
  • Compatible with biscuits sizes 0, 10 and 20

Did the position for a fraction of the cost of. Did the career for a portion of the cost of other people i have witnessed. Have not made use of for everything other than straight cuts yet but can not fault it.

Blown absent by this biscuit jointer. I go through the critiques and was a very little uncertain about high-quality degree cuts becoming made with this price range software, but with a couple of apply cuts to get employed to it i was ready to go and it was a fantastic each and every cut. I lower from the foundation of the device and from the fence and equally had been similarly as excellent – just acquire your time. I would absolutely advocate cutting from the foundation when you can as it truly is just significantly less difficult. The depth gunge is a little bit odd, but i have set it up so the settings 2, four and 7 are for biscuits sized , 10 and 20 respectively which is all i require. Supplied i contemplated spending practically £200 to decide on this 1 for a quarter of the price and have all the exact options is ideal. Desire i might purchased one previously.

Reviews from purchasers :

  • A good tool that I have used on several jobs while
  • Did the job for a fraction of the price of
  • Excellent for the price.

Was initally sceptical that a focused biscuit cutter costing about the exact same as a biscuit cutting attachment for my router could be any very good but soon after making use of it a number of periods i’m truly impressed. Switch is a little bit fiddly, scales on the gate are a bit vague (easier to set it up by just urgent against the wooden and seeing the place the blade arrives) and it’s pretty noisy. Even so, once established up it cuts biscuit joints quickly and accurately enough for me. If you are just executing 90 or one hundred eighty degree joints, this kind of as for joining planks to make broader boards, this is all you will need. Very good plastic scenario way too – additional strong than just one commonly will get from the likes of draper etcetera. All in all, extremely advisable for the enthusiastic newbie do-it-yourself-er.

This is a fantastic piece of package. This is a fantastic piece of package. The fence is great and the cuts are clean.

Just studying far too use this quite simple to use.

Fantastic for occasional diy operate. Getting to make major modifications to a new corner sink cupboard to in good shape close to the soil stack and accommodate my water softener i experienced to decide no matter whether to use dowels, screws or biscuits to be a part of the mfc panels and rails. I have study heaps of very good factors about biscuit jointing as it offers a greater surface area place for the glue to keep and also enables for some adjustment of panel in good shape, unlike dowels which have to be specifically lined up. I did not want to make a significant financial investment in a resource that would not be employed pretty usually, so i experimented with a router bit (which i located uncomfortable and could not be utilised for encounter-joining). So then i went for this jointer. As a basic device, it requires much more set up exertion – the changes are all there, but they are more of a faf to get correct, primarily as the marked scales for depth and angle are not correct, so you have to evaluate oneself and do check cuts to confirm. In a professional context this would be unacceptable, but it is really a good compromise for occasional diy use to get a software this low-cost. The blade looks to burn off a reasonable bit, so likely isn’t really the sharpest both. Overall i am happy with the results, and the tool has fulfilled my expectations.

I love this , it tends to make gluing up of board for desk tops or models so significantly easier, i would have fortunately of specified this a five star score, however as it arrived just boxed without a scenario i sense it only justifies a 4.

Very good piece of kit for selling price. . Experienced to regulate to get it working just correct but not a dilemma.

Did the position for a fraction of the cost of. Did the career for a portion of the cost of other people i have witnessed. Have not made use of for everything other than straight cuts yet but can not fault it.

Fantastic for occasional diy operate. Getting to make major modifications to a new corner sink cupboard to in good shape close to the soil stack and accommodate my water softener i experienced to decide no matter whether to use dowels, screws or biscuits to be a part of the mfc panels and rails. I have study heaps of very good factors about biscuit jointing as it offers a greater surface area place for the glue to keep and also enables for some adjustment of panel in good shape, unlike dowels which have to be specifically lined up. I did not want to make a significant financial investment in a resource that would not be employed pretty usually, so i experimented with a router bit (which i located uncomfortable and could not be utilised for encounter-joining). So then i went for this jointer. As a basic device, it requires much more set up exertion – the changes are all there, but they are more of a faf to get correct, primarily as the marked scales for depth and angle are not correct, so you have to evaluate oneself and do check cuts to confirm. In a professional context this would be unacceptable, but it is really a good compromise for occasional diy use to get a software this low-cost. The blade looks to burn off a reasonable bit, so likely isn’t really the sharpest both. Overall i am happy with the results, and the tool has fulfilled my expectations.

Wonderful item and good high-quality would defiantly invest in from once again.

Small price basic biscuit jointing. Low expense very simple biscuit jointing. I have never tried everything other than 90 degree jointing & suspect that great obtuse joints may possibly be extremely complicated. But for cupboard or body earning – what i use it for – it will work quite very well.

I experienced three reliable oak coffee and lamp tables to develop. All thanks to my wife picking out a vary of furnature that didn’t have tables of the suitable dimensions to in shape our alcoves. I had a eyesight of all the get the job done required, forming the joints. As it turned out, immediately after getting the biscuit jointer, it was a piece of cake. The jointer is effortless to use and uncomplicated to work and i could endorse it to anyone as a reasonably priced quality product.

Terrific solution, i am very pleased.

I love this , it tends to make gluing up of board for desk tops or models so significantly easier, i would have fortunately of specified this a five star score, however as it arrived just boxed without a scenario i sense it only justifies a 4.

By gum, this device does what it states. There is certainly a little bit of play in the vertical (thickness) adjustment, but an more washer decreases this. No suited for bespoke cabinetry, but it handles everything else correctly. Incredibly potent motor will make fast perform of the occupation.

Small price basic biscuit jointing. Low expense very simple biscuit jointing. I have never tried everything other than 90 degree jointing & suspect that great obtuse joints may possibly be extremely complicated. But for cupboard or body earning – what i use it for – it will work quite very well.

This is a relaxed tool to use, little or no vibration, uncomplicated to position and slash correct biscuit joints. There are guides for depth of plunge cuts and posiotioning on the facial area of the timber for jointing, even though the guides search approximate fairly than absolutley accurate, but it id definitely workable. It cuts at ninety levels to the edge and has an angle fence for other angles. It comes with two spare bushes. All-in-all, good value for dollars.

One thought on “Silverline storm 128999 – 900W Biscuit Jointer 230V – Well its good for a cheap machine and saves setting a cutter

  1. This review is from : Silverstorm 128999 – 900W Biscuit Jointer 230V

    Blown away by this biscuit jointer. I read the reviews and was a little unsure about quality level cuts being made with this budget tool, but with a few practice cuts to get used to it i was ready to go and it was a perfect every cut. I cut from the base of the machine and from the fence and both were equally as good – just take your time. I’d definitely recommend cutting from the base when you can as it’s just much easier. The depth gunge is a bit odd, but i have set it up so the settings 2, 4 and 7 are for biscuits sized 0, 10 and 20 respectively which is all i need. Given i contemplated spending nearly £200 to pick this one for a quarter of the price and have all the same features is ideal. Wish i’d bought one earlier.
  2. This review is from : Silverstorm 128999 – 900W Biscuit Jointer 230V

    Blown away by this biscuit jointer. I read the reviews and was a little unsure about quality level cuts being made with this budget tool, but with a few practice cuts to get used to it i was ready to go and it was a perfect every cut. I cut from the base of the machine and from the fence and both were equally as good – just take your time. I’d definitely recommend cutting from the base when you can as it’s just much easier. The depth gunge is a bit odd, but i have set it up so the settings 2, 4 and 7 are for biscuits sized 0, 10 and 20 respectively which is all i need. Given i contemplated spending nearly £200 to pick this one for a quarter of the price and have all the same features is ideal. Wish i’d bought one earlier.
    1. Low cost simple biscuit jointing. Low cost simple biscuit jointing. I have never tried anything other than 90 degree jointing & suspect that good obtuse joints might be very difficult. But for cabinet or frame making – what i use it for – it works very well.
  3. This review is from : Silverstorm 128999 – 900W Biscuit Jointer 230V

    Low cost simple biscuit jointing. Low cost simple biscuit jointing. I have never tried anything other than 90 degree jointing & suspect that good obtuse joints might be very difficult. But for cabinet or frame making – what i use it for – it works very well.
    1. Did the job for a fraction of the price of. Did the job for a fraction of the price of others i have seen. Haven’t used for anything other than straight cuts yet but can’t fault it.
      1. Did the job for a fraction of the price of. Did the job for a fraction of the price of others i have seen. Haven’t used for anything other than straight cuts yet but can’t fault it.
  4. By gum, this unit does what it says. There’s a bit of play in the vertical (thickness) adjustment, but an extra washer reduces this. No suited for bespoke cabinetry, but it handles anything else perfectly. Very powerful motor makes quick work of the job.
  5. This review is from : Silverstorm 128999 – 900W Biscuit Jointer 230V

    By gum, this unit does what it says. There’s a bit of play in the vertical (thickness) adjustment, but an extra washer reduces this. No suited for bespoke cabinetry, but it handles anything else perfectly. Very powerful motor makes quick work of the job.
    1. This is a great piece of kit. This is a great piece of kit. The fence is good and the cuts are clean.
      1. This is a great piece of kit. This is a great piece of kit. The fence is good and the cuts are clean.
  6. This review is from : Silverstorm 128999 – 900W Biscuit Jointer 230V

    Great item and good quality would defiantly buy from again.
  7. This review is from : Silverstorm 128999 – 900W Biscuit Jointer 230V

    Great item and good quality would defiantly buy from again.

Comments are closed.