Ferm BGM1019 Bench Grinder 150W – 150mm – Incl : Excellent product. Represents better value and flexibility than say

Always have wanted a grinder and it seems perfect.

Excellent service and value for money, thank you, robert.

Great item , packaged well , and so far does what it says on the box , great value for your money.

Good enough for light work. . Good enough bearing in mind the price. However, it got too hot to touch the casing after only 20-30 minutes touching up set of hss drills. The stones are a bit in the soft side and showed visible wear in the wheel centre after sharpening 14 drills from 3- 12 mm dia. Ok for light use similar to the above but forget any heavy work. Suits my purpose of drill sharpening, cheaper than buying new drills.

  • Quiet and vibration free, at a very good.
  • Good enough for light work.
  • A little bit tricky to assemble. Some of the

FERM BGM1019 Bench Grinder 150W – 150mm – Incl. P36 und P60 Grinding stones, Safety glasses and Spark arresters

  • Dust proof switch for extra long life span
  • G36 & G60 grinding stones for fine and rough grinding
  • Work rest for comfortable working
  • Mountable to your workbench

Great little machine at a really good price-runs v. Quietly, and accessories are available from [.

An excellent machine, great value for your money. An excellent machine,great value for your money. I like the 2 different grinding stones. It,s the first time in years that all of my chipped,damaged tools are back in full woking order.

Very good for price, been using and works perfectly thank u.

It very good for the price, changed one side to a tapered strew for mops etc.

Always have wanted a grinder and it seems perfect.

Quiet and vibration free, at a very good. . Arrived quickly and as described, it was purchased to replace a silverline version, which threw a disc at me. I switched this one without bolting it down and it just sat there with very little noise and no vibration, the other one virbrated the whole place down, even though it was bolted down. If you want a quiet powerhouse, buy the fern, at this price it is a no brainer.

Looks to be ideal for my requirements. . Minimal, straightforward assembly required. Not yet used but looks to be ideal for my requirements.

Very good for price, been using and works perfectly thank u.

Excellent service and value for money, thank you, robert.

This is a good buy the grinder is a nice size doesn’t take. This is a good buy the grinder is a nice size doesn’t take up a lot of room works very well and a good price.

A little bit tricky to assemble. A little bit tricky to assemble. Some of the bolts for the safety guards didn’t fit the threads. I had to use replacement bolts which i had to cut to size. Handy to have on the workbench.

An excellent good quality grinder at a great price.

Possibly not as powerful as others but as a hobbyist it’s good. I use it to sharpen applications and grind down previous screw driver heads. As lengthy as your not trying to use metal plate its for you. I’ve not long ago acquired sharpening equipment and they are superb. The grinding wheels are easily eradicated and the polishing buffers have changed them. Ive utilized them to polish old golfing golf equipment for resale and even utilised them to polish aged sneakers. A quite flexible tool, fairly low-priced and a incredibly silent motor.

An superb superior high-quality grinder at a wonderful price tag.

I will not have significantly to assess this to considering the fact that it can be my very first bench grinder, but i’m extremely pleasantly stunned. It is really taken a battering this earlier week since i acquired a joblot of outdated instruments and this has dealt with it commendably. I have utilized the two stones which arrive with it to sharpen chisels, knives, and so forth and have also been utilizing a wire wheel i acquired separately to deal with a good deal of rusty tools. The motor does heat up relatively speedily (or maybe not, as i say i’ve by no means had just one before) but i ordinarily never force significantly more than ten or 15 minutes use out of it at a time. Give it time to cool down then have an additional go. That’s fantastic even though, you can get a large amount performed in 15 minutes and i’m pretty joyful with the final results. For the cost you just are not able to go erroneous. Even if it stopped operating nowadays i’d even now truly feel it experienced offered me a respectable return and i have only had it a pair of weeks.

Fantastic little machine at a really superior value-runs v. Quietly, and accessories are readily available from [.

A minor little bit challenging to assemble. A minimal bit challenging to assemble. Some of the bolts for the safety guards failed to fit the threads. I experienced to use substitution bolts which i had to lower to dimensions. Useful to have on the workbench.

Seems to be to be excellent for my demands. . Minimum, easy assembly demanded. Not nevertheless utilized but appears to be like to be perfect for my needs.

One thought on “Ferm BGM1019 Bench Grinder 150W – 150mm – Incl : Excellent product. Represents better value and flexibility than say

  1. I don’t have much to compare this to since it’s my first bench grinder, but i’m very pleasantly surprised. It’s taken a battering this past week since i bought a joblot of old tools and this has dealt with it commendably. I have used the two stones which come with it to sharpen chisels, knives, etc and have also been using a wire wheel i bought separately to deal with a lot of rusty tools. The motor does heat up relatively quickly (or maybe not, as i say i’ve never had one before) but i usually don’t push much more than 10 or 15 minutes use out of it at a time. Give it time to cool down then have another go. That’s fine though, you can get a lot done in 15 minutes and i’m very happy with the results. For the price you just can’t go wrong. Even if it stopped working today i’d still feel it had given me a decent return and i’ve only had it a couple of weeks.
    1. I don’t have much to compare this to since it’s my first bench grinder, but i’m very pleasantly surprised. It’s taken a battering this past week since i bought a joblot of old tools and this has dealt with it commendably. I have used the two stones which come with it to sharpen chisels, knives, etc and have also been using a wire wheel i bought separately to deal with a lot of rusty tools. The motor does heat up relatively quickly (or maybe not, as i say i’ve never had one before) but i usually don’t push much more than 10 or 15 minutes use out of it at a time. Give it time to cool down then have another go. That’s fine though, you can get a lot done in 15 minutes and i’m very happy with the results. For the price you just can’t go wrong. Even if it stopped working today i’d still feel it had given me a decent return and i’ve only had it a couple of weeks.

Comments are closed.