Evolution Power Tools – Steel Evolution EVOSAW355 Industrial Steel Chop Saw – Intermittent start

I acquired this saw due to the superior assessments. It arrived in fantastic problem, and box experienced not been opened. Having said that, they sent the ‘newer model raptor 355 instead of the evosaw 355. The difference is that it’s a slightly more cost-effective construct, gney have performed absent with the wayquick slide flip more than include for the vice on the raptor, now you have to wind it all the way in, while on the evosaw you just flipped the again deal with, slid the vice forward, then flipped the go over the other way, and screwed the very last bit for tightening. It won’t actually have an impact on the features, but is annoying as it is really time consuming when you have plenty of bits to do. Also, the saw is mounted off centre, so when you convey it down its saws a minor into the aspect of the slot, which could likely force the lower slightly out. Mounted an additional one/4′-1/2’ to the proper, and it would have been practically dead centre. Most likely will not likely have an affect on features (it is right after all a metallic cutting saw) it really is however shoddy workmanship, and not what i expected. Will see if i can possibly disassemble it, and move it with some washers or tubing to act as a spacer, and get the saw blade away from cutting into the foundation.

Just what we have been hoping for. I won’t be able to think, i can acquire the affordable and applicable goods listed here, this is a pleasant buying. Now i am buying once again, to give it to my girlfriends, i’m guaranteed she’ll like it. Severely consider it these are excellent. Work surprisingly very well appears to be a high high-quality just one.

Excellent – very advise. Bought this saw to cut a large amount of galvanised steel trunking and lid (100mm) – saved me hours would extremely propose.Here are the specifications for the Evolution Power Tools – Steel Evolution EVOSAW355 Industrial Steel Chop Saw:

  • Ideal for cutting steel – also compatible with evolution stainless steel and aluminium blades
  • No heat, burrs or coolant
  • High-speed carbide-tipped blade gives a good finish
  • Powerful 2200 W motor
  • Three year warranty (only valid if purchased in the UK)

Sorry by my english, i speak spanish. Sorry by my english, i discuss spanish. The equipment is wonderfull, and the saw blade cuts quite perfectly but lasts pretty tiny.

4mm wall 40×40 box part like butter . Dont neglect safety glasses and ear defense. I used it for a several times of slicing 4mm wall 40×40 box segment.

Reviews from purchasers :

  • Worth the extra money for cutting metal.
  • You need one of these.
  • Should have bought this before spending money on my previous abrasive chop saw!!

Need to have purchased this prior to spending dollars on my preceding abrasive chop saw. Soon after utilizing it for a minimal whilst for dwelling initiatives i am absolutetly contented with this saw. It is pretty perfectly designed and robust. It has a really sturdy vice which is a breeze to adjust for diverse angle cuts. The saw is robust and rapid and the cut high quality is wonderful. The chip tray is a very neat element. Arms down i would advocate this saw to everyone.

The carbide tipped blade that occur with it cuts quite nicely, but not acceptable for mine. We manufacture roof purlins , rationale i purchased this device is to angle cut 10degree 4′ roof channels, for my purchaser who wishes to develop hen farm, i broke number of blade recommendations in a lot less than 10cuts because my product or service is far too skinny 1. 6mm thickness , its practically nothing to do with evosaw just that my product is not acceptable. I transformed the blade to rage 355mm blade and it will work out ideal.

Applied it to slice steel pipes (40×30 mm).

The carbide tipped blade that occur with it cuts quite nicely, but not acceptable for mine. We manufacture roof purlins , rationale i purchased this device is to angle cut 10degree 4′ roof channels, for my purchaser who wishes to develop hen farm, i broke number of blade recommendations in a lot less than 10cuts because my product or service is far too skinny 1. 6mm thickness , its practically nothing to do with evosaw just that my product is not acceptable. I transformed the blade to rage 355mm blade and it will work out ideal.

The only sudden up normality is the start out switch. It’s not normally activated when i thrust the relevant on/off take care of.

Wonderful blade, durable construction. Leaves a incredibly clear, burr cost-free, great reduce. Arrived with extra brushes for the motor.

Applied it to slice steel pipes (40×30 mm).

Sorry by my english, i speak spanish. Sorry by my english, i discuss spanish. The equipment is wonderfull, and the saw blade cuts quite perfectly but lasts pretty tiny.

Very best a single i ever experienced, worthy of the funds, went way outside of proposed cuts and still excellent.

Outstanding chilly reduce saw for selling price.

Realy great saw extremely pleased.

Very best a single i ever experienced, worthy of the funds, went way outside of proposed cuts and still excellent.

Outstanding chilly reduce saw for selling price.

I cannot consider how very good this saw is. For decades i have been using abrasive minimize off discs and dwelling with the mess they make and submitting off the burrs left guiding. This is thoroughly clean cutting, small metal swarf chips relatively than dust all over the place. Exact and effortless to established up. It does ring when you’re chopping so make sure you have ear defenders on when applying. Locks in the down situation to retail outlet or transport. I’m not sure how lengthy the blade will previous, but it is even now likely powerful. Wonderful rate from amazon – appreciably much less expensive than machine mart.

Worthy of the more revenue for chopping metal. . I recently utilised my device to cut 3’x1/4′ thick angle iron and it was like a knife by butter. There have been some sparks, but nowhere in the vicinity of the light demonstrate you get from a friction bladed machine. I believe this was due to the rust on the steel much more than everything, but the cuts ended up pretty ‘clean’ and specific, with no want to use a small hand grinder to get rid of any flash afterwards. It was also extremely quick to use when when compared to a large (heavy) hand grinder with a slicing disc fitted. The steel was also cold to contact just after every slash, but the edges have been not blunt, so use gloves if the steel just minimize is at all large to handle. Beware to use a whole experience visor to avert small bits of metal hitting your face, particularly if you use the equipment on a table of some kind. The very long detachable tray below the blade catches most of the ‘chips’, but not all, so be conscious you need to sweep the ground just after use. It is simply made use of a single handed, while you do require to pull the blade down onto the metallic as it cuts as the return spring is quite solid. This usually means there is no way the blade can arrive down on its personal unless you want it to, creating it rather a ‘safe’ equipment to use when as opposed to a 9′ hand grinder for instance.

Just what we have been hoping for. I won’t be able to think, i can acquire the affordable and applicable goods listed here, this is a pleasant buying. Now i am buying once again, to give it to my girlfriends, i’m guaranteed she’ll like it. Severely consider it these are excellent. Work surprisingly very well appears to be a high high-quality just one.

One thought on “Evolution Power Tools – Steel Evolution EVOSAW355 Industrial Steel Chop Saw – Intermittent start

  1. Best one i ever had, worth the money, went way beyond recommended cuts and still perfect.
    1. Best one i ever had, worth the money, went way beyond recommended cuts and still perfect.
  2. The only unexpected up normality is the start switch. It’s not always activated when i push the relevant on/off handle.
  3. This review is from : Evolution EVOSAW355 Industrial Steel Chop Saw, 355 mm (230V)

    The only unexpected up normality is the start switch. It’s not always activated when i push the relevant on/off handle.
    1. Sorry by my english, i speak spanish. Sorry by my english, i speak spanish. The machine is wonderfull, and the saw blade cuts very well but lasts very little.
      1. Sorry by my english, i speak spanish. Sorry by my english, i speak spanish. The machine is wonderfull, and the saw blade cuts very well but lasts very little.
  4. This review is from : Evolution EVOSAW355 Industrial Steel Chop Saw, 355 mm (230V)

    4mm wall 40×40 box section like butter . Dont forget safety glasses and ear protection. I used it for a few days of cutting 4mm wall 40×40 box section.
    1. 4mm wall 40×40 box section like butter . Dont forget safety glasses and ear protection. I used it for a few days of cutting 4mm wall 40×40 box section.
  5. This review is from : Evolution EVOSAW355 Industrial Steel Chop Saw, 355 mm (230V)

    The carbide tipped blade that come with it cuts very nicely, but not suitable for mine. We manufacture roof purlins , reason i bought this machine is to angle cut 10degree 4″ roof channels, for my customer who wants to build chicken farm, i broke few blade tips in less than 10cuts because my product is too thin 1. 6mm thickness , its nothing to do with evosaw just that my product is not suitable. I changed the blade to rage 355mm blade and it works out perfect.
  6. This review is from : Evolution EVOSAW355 Industrial Steel Chop Saw, 355 mm (230V)

    The carbide tipped blade that come with it cuts very nicely, but not suitable for mine. We manufacture roof purlins , reason i bought this machine is to angle cut 10degree 4″ roof channels, for my customer who wants to build chicken farm, i broke few blade tips in less than 10cuts because my product is too thin 1. 6mm thickness , its nothing to do with evosaw just that my product is not suitable. I changed the blade to rage 355mm blade and it works out perfect.
    1. Exactly what we were hoping for. I can’t believe, i can buy the economical and applicable products here, this is a pleasant shopping. Now i am ordering again, to give it to my girlfriends, i’m sure she’ll like it. Seriously try it these are great. Work amazingly well seems to be a high quality one.
      1. Exactly what we were hoping for. I can’t believe, i can buy the economical and applicable products here, this is a pleasant shopping. Now i am ordering again, to give it to my girlfriends, i’m sure she’ll like it. Seriously try it these are great. Work amazingly well seems to be a high quality one.
  7. This review is from : Evolution EVOSAW355 Industrial Steel Chop Saw, 355 mm (230V)

    I purchased this saw due to the good reviews. It arrived in good condition, and box had not been opened. However, they sent the “newer model raptor 355 instead of the evosaw 355. The difference is that it’s a slightly cheaper build, gney have done away with the wayquick slide flip over cover for the vice on the raptor, now you have to wind it all the way in, whereas on the evosaw you just flipped the back cover, slid the vice forward, then flipped the cover the other way, and screwed the last bit for tightening. It doesn’t really affect the functionality, but is annoying as it’s time consuming when you have lots of bits to do. Also, the saw is mounted off centre, so when you bring it down its saws a little into the side of the slot, which could potentially push the cut slightly out. Mounted another 1/4″-1/2” to the right, and it would have been almost dead centre. Probably won’t affect functionality (it is after all a metal cutting saw) it’s still shoddy workmanship, and not what i expected. Will see if i can maybe disassemble it, and move it with some washers or tubing to act as a spacer, and get the saw blade away from cutting into the base.
    1. I purchased this saw due to the good reviews. It arrived in good condition, and box had not been opened. However, they sent the “newer model raptor 355 instead of the evosaw 355. The difference is that it’s a slightly cheaper build, gney have done away with the wayquick slide flip over cover for the vice on the raptor, now you have to wind it all the way in, whereas on the evosaw you just flipped the back cover, slid the vice forward, then flipped the cover the other way, and screwed the last bit for tightening. It doesn’t really affect the functionality, but is annoying as it’s time consuming when you have lots of bits to do. Also, the saw is mounted off centre, so when you bring it down its saws a little into the side of the slot, which could potentially push the cut slightly out. Mounted another 1/4″-1/2” to the right, and it would have been almost dead centre. Probably won’t affect functionality (it is after all a metal cutting saw) it’s still shoddy workmanship, and not what i expected. Will see if i can maybe disassemble it, and move it with some washers or tubing to act as a spacer, and get the saw blade away from cutting into the base.
      1. Seems to cut very well just waiting to see how it copes after a bit of use but overall pleased.
  8. Seems to cut very well just waiting to see how it copes after a bit of use but overall pleased.
  9. This review is from : Evolution EVOSAW355 Industrial Steel Chop Saw, 355 mm (230V)

    I can’t believe how good this saw is. For years i’ve been using abrasive cut off discs and living with the mess they make and filing off the burrs left behind. This is clean cutting, little metal swarf chips rather than dust everywhere. Accurate and easy to set up. It does ring when you’re cutting so make sure you have ear defenders on when using. Locks in the down position to store or transport. I’m not sure how long the blade will last, but it’s still going strong. Great price from amazon – significantly cheaper than machine mart.
  10. This review is from : Evolution EVOSAW355 Industrial Steel Chop Saw, 355 mm (230V)

    I can’t believe how good this saw is. For years i’ve been using abrasive cut off discs and living with the mess they make and filing off the burrs left behind. This is clean cutting, little metal swarf chips rather than dust everywhere. Accurate and easy to set up. It does ring when you’re cutting so make sure you have ear defenders on when using. Locks in the down position to store or transport. I’m not sure how long the blade will last, but it’s still going strong. Great price from amazon – significantly cheaper than machine mart.
  11. This review is from : Evolution EVOSAW355 Industrial Steel Chop Saw, 355 mm (230V)

    Should have bought this before spending money on my previous abrasive chop saw. After using it for a little while for home projects i am absolutetly satisfied with this saw. It is very well made and robust. It has a very sturdy vice which is a breeze to adjust for different angle cuts. The saw is strong and fast and the cut quality is superb. The chip tray is a very neat detail. Hands down i would recommend this saw to anyone.
  12. This review is from : Evolution EVOSAW355 Industrial Steel Chop Saw, 355 mm (230V)

    Should have bought this before spending money on my previous abrasive chop saw. After using it for a little while for home projects i am absolutetly satisfied with this saw. It is very well made and robust. It has a very sturdy vice which is a breeze to adjust for different angle cuts. The saw is strong and fast and the cut quality is superb. The chip tray is a very neat detail. Hands down i would recommend this saw to anyone.
    1. Best purchase i’ve made for my workshop. This is a super price for an amazing saw. I’ve previously only worked with abrasion saws, and the first cut with the raptor through a 50x50x3mm square tube was like slicing a hot knife through butter. Not only are the cuts smooth, but there are virtually no burrs left which reduces edge cleaning/grinding time by 90%. Mitre cuts are equally clean. I can definitely recommend this product.
      1. Best purchase i’ve made for my workshop. This is a super price for an amazing saw. I’ve previously only worked with abrasion saws, and the first cut with the raptor through a 50x50x3mm square tube was like slicing a hot knife through butter. Not only are the cuts smooth, but there are virtually no burrs left which reduces edge cleaning/grinding time by 90%. Mitre cuts are equally clean. I can definitely recommend this product.
  13. This review is from : Evolution EVOSAW355 Industrial Steel Chop Saw, 355 mm (230V)

    Worth the extra money for cutting metal. . I recently used my machine to cut 3″x1/4″ thick angle iron and it was like a knife through butter. There were some sparks, but nowhere near the light show you get from a friction bladed machine. I think this was due to the rust on the metal more than anything, but the cuts were very ‘clean’ and precise, with no need to use a small hand grinder to remove any flash afterwards. It was also very easy to use when compared to a large (heavy) hand grinder with a cutting disc fitted. The metal was also cold to touch after each cut, but the edges were not blunt, so wear gloves if the metal just cut is at all heavy to handle. Beware to use a full face visor to prevent small bits of metal hitting your face, especially if you use the machine on a table of some kind. The long removable tray under the blade catches most of the ‘chips’, but not all, so be aware you need to sweep the floor after use. It is easily used one handed, though you do need to pull the blade down onto the metal as it cuts as the return spring is very strong. This means there is no way the blade can come down on its own unless you want it to, making it quite a ‘safe’ machine to use when compared to a 9″ hand grinder for instance.
    1. Worth the extra money for cutting metal. . I recently used my machine to cut 3″x1/4″ thick angle iron and it was like a knife through butter. There were some sparks, but nowhere near the light show you get from a friction bladed machine. I think this was due to the rust on the metal more than anything, but the cuts were very ‘clean’ and precise, with no need to use a small hand grinder to remove any flash afterwards. It was also very easy to use when compared to a large (heavy) hand grinder with a cutting disc fitted. The metal was also cold to touch after each cut, but the edges were not blunt, so wear gloves if the metal just cut is at all heavy to handle. Beware to use a full face visor to prevent small bits of metal hitting your face, especially if you use the machine on a table of some kind. The long removable tray under the blade catches most of the ‘chips’, but not all, so be aware you need to sweep the floor after use. It is easily used one handed, though you do need to pull the blade down onto the metal as it cuts as the return spring is very strong. This means there is no way the blade can come down on its own unless you want it to, making it quite a ‘safe’ machine to use when compared to a 9″ hand grinder for instance.

Comments are closed.