Evolution Power Tools – Project Evolution FURY5-S Multi-Purpose Table Saw : SAW TABLE ITSELF IS AN EXCELLENT PIECE OF KIT DOES WHAT I WANTED WELL

Exceptional value for the revenue.

Assessment of evolution fury s-5 saw table. Packingthe saw table arrived adequately packed and sufficiently for the function intended. Unpackingall elements essential for placing alongside one another the table saw have been located as demanded and in seem ailment. Unit assemblyapproximately two (2) hrs, which is regarded satisfactory. Multipurpose bladethe blade delivered was observed to operate incredibly effectively with wooden, plywood, mdf (all of unique thickness). Table extensions and assist strutsthe table extensions and their aid struts had been uncovered quick to assemble. Software of fat on the extensions resulted in deformation exactly where the supports are bolted. Treatment has to be taken to assure that the extensions are level with the primary table. Leg set, cross braces and rubber feetthe legs, cross braces and rubber ft have been extremely easy to assemble. Blade guard with extraction portthe blade guard was located not to raise when the board to be cut arrived in contact with it, so it experienced to be arranged above the board to reach an uninterrupted minimize.

Evolution FURY5-S Multi-Purpose Table Saw, 255 mm (230V)

  • Utilises patented Evolution multipurpose cutting technology, optimised to cut mild steel, non-ferrous metals, wood and plastic with one blade
  • Cutting mild steel leaves an instantly workable finish, producing no heat, no burr and virtually no sparks
  • Bevel cutting up to 45 degrees and a cutting depth of up to 85 mm through wood
  • 255 mm FURY multipurpose TCT blade (24 teeth) included
  • 3-year warranty (only valid if purchased in the UK)

Fantastic saw does what it’s ment to and perform pretty nicely for me really delighted.

Incredibly speedy – rips oak with ease.

Perfectly l am extremely pleased with this saw. Effectively l am quite happy with this saw. 1st position was to make a top rated to make it helpful as its always beneficial to have further perform floor in my workshopi have also additional an extractor , which will save me a ton of time cleaning up all the dust.

Evolution FURY5-S Multi-Purpose Table Saw, 255 mm (230V) : Reasonably good but the blade screaming if the stock feeding is. Reasonably good but the blade screaming if the stock feeding is not a straight. It makes me worry as the table surface is not as smooth as we imagine. I think a table sled or a modified surface should make stocks slide better and smoother to ease out the inconvenience. Not recommended for large piece of stock, say 4′ x 8′ unless you got a saw horse to support the outfeed. Cutting through 2 x 3″ rectangular mild steel without a problem and also cut gi steel and aluminium with little spark or not at all if the initial feeding into the blade is straight.

Blade cuts wooden like butter. Other opinions explained the conclusion tables are not strong – nothing of the type. Would recommend earning a cross-cut sled to minimise the clearance among the blade and the table. Otherwise a fantastic product – does what it says on the box.

Does precisely what it states it does.

Great equipment does just what it states on the box. . Reading through the other opinions i was at to start with a small suspicious as to this becoming a sturdy device and suspect the alignments instructed by some reviewers, also the complication of assembly. My feeling, if you had these challenges then you really should not be shopping for enable by itself utilizing this type of gear. I locate it can be quite sturdy, the switches are preferably placed, to change off just press the cover shut, and the go over is there for protection functions. The aspect extensions are incredibly firm and steady. The front mounted rule could have been in one particular piece, would have been far better, suppose it can be in two should you not would like to use the side extensions. Not a noisy device as some suggest, then this was not my initially table saw. The side fence has to be aligned with the blade in advance of accurate cuts can be created, (this is stated in the instructions). The fence is not easily utilised on the remaining of the blade, not sure if this can be accomplished, would be a person improvement i would recommend, but not a issue. I discovered the device was not a heavy as i originally believed, i assembled it in our conservatory then carried it into the garage with the help of my wife, only trouble we had was the receiving it by way of the door opening.

Great equipment does just what it states on the box. . Reading through the other opinions i was at to start with a small suspicious as to this becoming a sturdy device and suspect the alignments instructed by some reviewers, also the complication of assembly. My feeling, if you had these challenges then you really should not be shopping for enable by itself utilizing this type of gear. I locate it can be quite sturdy, the switches are preferably placed, to change off just press the cover shut, and the go over is there for protection functions. The aspect extensions are incredibly firm and steady. The front mounted rule could have been in one particular piece, would have been far better, suppose it can be in two should you not would like to use the side extensions. Not a noisy device as some suggest, then this was not my initially table saw. The side fence has to be aligned with the blade in advance of accurate cuts can be created, (this is stated in the instructions). The fence is not easily utilised on the remaining of the blade, not sure if this can be accomplished, would be a person improvement i would recommend, but not a issue. I discovered the device was not a heavy as i originally believed, i assembled it in our conservatory then carried it into the garage with the help of my wife, only trouble we had was the receiving it by way of the door opening.

Have used this a handful of moments now and it is proving to be a incredibly functional and remarkable machine. Was anxious it may well be a bit of a ‘toy’ for the value, but absolutely not. I have made use of it to cut two x 240 x 120cm ply boards into planks to make shelving for my workshop. Then utilised it to trim pine boards to 2cm to make edges for the shelves – produced the two jobs pretty uncomplicated. Have cut the ideal tenon joints i have ever managed and, alongside with a router table purchased at the exact same time, have virtually concluded producing a replacement sash windowvery impressed – i acquired an evolution hand held circular saw a couple of months prior – it has the same blade and is equally impressive. Only draw back – as other people have famous – is the flimsy fence – fine for light get the job done (like the pine strips) but for heavier jobs, a piece of aluminium angle and a pair of clamps sorted it out. Also light adequate to be quickly moved by a person human being – i maintain in out of the way in the tool retail store and go it into the ‘limited space’ workshop as and when desired.

The blade provides a nice thoroughly clean slash. I earlier experienced the evolution sliding mitre saw which i observed amazing so i took the plunge. I have now experienced this saw for just in excess of two months. The blade offers a nice clear minimize and if set up properly the saw presents a precise slice. It truly is value having the further time on this part of the set up. I’ll be truthful, i pretty much skimped when i obtained to this element in the guidance as by then i’d dropped the will to are living. Placing it alongside one another did take a when, 3 hours i assume, but at the end of it you might be still left with a great secure table saw. The hardest part is most likely retrieving the fittings from the inside of of the saw, you will require to idea the blade. Whoever came up with that concept demands shooting. As with most matters in everyday living there are downsides. As some others have said the fence is not superior. It does transfer as it truly is not secured equally finishes. This can be rectified by creating your personal, there are a good deal of movies on youtube or content articles on pinterest.

Great table saw for the cost vary with a few very little issues. . I had been seeking to buy a saw table for the garage as i was usually needing to slash very long strips down in width so had been wanting at a couple of alternatives available. There have been a selection of choice that had been more affordable and a large amount which have been a large amount extra pricey. I have an evolution sliding mitre saw which i have under no circumstances had any issues and has constantly worked perfectly so i determined to check out them all over again for the saw table. Anything i appreciated was that they are a british organization and if you need any help you are conversing to anyone in the region. When i procured this, i was one particular of the initially and it experienced only just been introduced, replacing the fury five table. As there are not many assessments i preferred to go away some of my ideas and impressions. The table will come in a fairly substantial box. Be prepared to spend an hour or two placing it all with each other. The legs, braces, nuts and bolts etcetera all arrive in just the primary physique.

If you want a saw bench this is the a single. I experienced a triton saw bench beforehand but gave up the ghost so assumed i would give the evolution a attempt and i have never ever seemed back again. There are a handful of things improper but these can be set correct, with a small even though but apart from the minor nigals i’ve been very delighted with the overall performance.

Normally desired to get a table saw so i saw the evaluations and viewed the youtube movies for this machine and believed it seems to be the element and very low-cost. I have currently utilized it for lengthy pieces of wood, steel tubing and plastic tubing. Requires a even though to assemble and you will need to take care and observe directions to obtain respectable precision. I really like it so significantly i’m now on the lookout for employment to do so i can use itvery noisy even though so use ear defense.

1st table saw, and would seem to be a superior ‘un. . Not had it also very long, and my very first table saw. Nothing too desperate about placing it all collectively – which mainly considerations the stand and facet extensions. Finding and aligning the entrance measurement part was less difficult than i thought it would be (just because it comes in two components i assumed it could be a challenge). Every little thing seemed to be exact and precise when checking it all just after placing it jointly, and my first cuts were being place on in terms of width and being cut square. Bear in head this is only soon after a few cuts just after just a couple of times, but don’t envisage any troubles. Cuts easy and correctly, with a pleasant and steady table and extensions. I’ve only acquired a quite modest house to operate in, so the mounted facet extensions make it a little bit of a issue to tuck out of the way when not in use, but that’s a small oversight on my component. It is noisy (as has been talked about), and the only issue that seems like it may be a little bit suspect is the blade guard which is a tad floppy in the horizontal airplane so wondering it could conclude up fouling the blade at some position (however could be incorrect i guess). Other than that, i cannot review it to other table saws so can only say it would seem well developed, blade cuts smooth as something (which looks to be most peoples key obtaining place for this saw) and the guidelines were being uncomplicated to abide by for assembly and use.

Cuts by way of wooden like butter, the only down facet is the edging. Cuts through wood like butter, the only down side is the edging information, its only fifty percent the duration of the table, but uncomplicated to around arrive, as soon as you established the guideline just clamp a size of wood driving it, previously slash 18mm mdf and some solid woods moreover ply sheets, place on every time, the high-quality blade and the speed it operates limits just about all rip out,.

Very good for the dollars for do-it-yourself enthusiastic, it’s chopping all variety of sorts of wood and boards ,steel,plastics as they promised ,wing side benches they could be much better be thorough. When you use it, fantastic get started bench saw.

This is my first table saw and initially time making use of just one and i am extremely satisfied with all the factors i can do with it. Cutting wood with nails its never ever a worry. Easy to assembly, occur with a blade presently installed, evolution devices feels extremely solid also purchased a mitre saw from evolution and each devices are fantastic. Only concern will be the guidebook which is a bit off when you pushing the wood through about a millimetre, just wish the information fence would it be maintain from the back again as also and not just the entrance. But i gues earning a wooden jig will solved that. Still working on that since when precision is will need it this is a attracts again. Even so the device perfoms really properly. Thank you evolution my workshop appears to be like great with your very good looking equipment.

On the facial area of it this is a very good household/hobby saw for the selling price: i put in all over 3 hrs placing it collectively and environment it up and was glad that all the things was sq. and precise. Putting some stock by means of the cross lower and ripping together the tutorial fence i uncovered anything to minimize square and genuine, despite the fact that i would check anything just about every time i made use of it. I intend to make a cross-reduce sled, in any circumstance, so am not also anxious about the looseness of the mitre guidebook or the insubstantial good quality of the rip fence – i anticipated it. The blade is skinny and cuts very smoothly, without much tear out, although the equipment is noisy. The on/off swap is also insubstantial, but what can you count on at this┬áprice level: i bought this saw on the basis of my favourable encounter of evolution mitre saws and hoped that this would be a practical adjunct in the workshop until finally i could manage to replace my now defunct kitty saw table. By making a variety of jigs, i think i can do this and get good assistance out of the machine. The port at the back is very tiny, so will need vacuum extraction to maintain it very clear. On the other hand, there is an additional challenge with my equipment, hence the 3 stars. The mechanism that is utilised to raise and reduced the blade is defective: a grub screw or whatsoever junk they have made use of in position of the grub screw is missing, that means the gear wheel at the conclude of the winder shaft retains coming off leaving the blade both up or down and i have to keep putting it again with each other all over again.

Saw insert does not sit flush and bends when pressed. Regrettably owing to style pretty much unattainable to make very own to suit that is any far better. The fence is not entire length and moves about. I uncover the on/slice off buttons are quite poorly positioned and make it uncomfortable to use.

Very good for the dollars for do-it-yourself enthusiastic, it’s chopping all variety of sorts of wood and boards ,steel,plastics as they promised ,wing side benches they could be much better be thorough. When you use it, fantastic get started bench saw.

One thought on “Evolution Power Tools – Project Evolution FURY5-S Multi-Purpose Table Saw : SAW TABLE ITSELF IS AN EXCELLENT PIECE OF KIT DOES WHAT I WANTED WELL

  1. This review is from : Evolution FURY5-S Multi-Purpose Table Saw, 255 mm (230V)

    Really good cut lovely to use had a while now no problems.
  2. This review is from : Evolution FURY5-S Multi-Purpose Table Saw, 255 mm (230V)

    Very useful from two main points. Very useful from two main points. 2 extra width to the cutting surface. Motor is quiet which is a secondary plus in a workshop environment. As far as drawbacks are concerned there was just the time needed to set it up. There are quite a lot of nuts and bolts to attach all the parts and becomes a little tedious at times especially as i found you had to take some out again to attach later pieces as per instructions. I found i had to use a socket spanner to help speed the process up. I also found that the rip fence had been assembled incorrectly by the factory and i needed to put it in the correct way as it wouldn’t fit.
  3. This review is from : Evolution FURY5-S Multi-Purpose Table Saw, 255 mm (230V)

    Very useful from two main points. Very useful from two main points. 2 extra width to the cutting surface. Motor is quiet which is a secondary plus in a workshop environment. As far as drawbacks are concerned there was just the time needed to set it up. There are quite a lot of nuts and bolts to attach all the parts and becomes a little tedious at times especially as i found you had to take some out again to attach later pieces as per instructions. I found i had to use a socket spanner to help speed the process up. I also found that the rip fence had been assembled incorrectly by the factory and i needed to put it in the correct way as it wouldn’t fit.
  4. This review is from : Evolution FURY5-S Multi-Purpose Table Saw, 255 mm (230V)

    Well l am very happy with this saw. Well l am very happy with this saw. First job was to make a top to make it useful as its always useful to have extra work surface in my workshopi have also added an extractor , which saves me a lot of time cleaning up all the dust.
    1. Well l am very happy with this saw. Well l am very happy with this saw. First job was to make a top to make it useful as its always useful to have extra work surface in my workshopi have also added an extractor , which saves me a lot of time cleaning up all the dust.
  5. This review is from : Evolution FURY5-S Multi-Purpose Table Saw, 255 mm (230V)

    Brilliant saw does what it’s ment to and work very well for me very pleased.
    1. If you want a saw bench this is the one. I had a triton saw bench previously but gave up the ghost so thought i would give the evolution a try and i’ve never looked back. There are a few things wrong but these can be put right, with a little though but apart from the little nigals i’ve been very pleased with the performance.
      1. If you want a saw bench this is the one. I had a triton saw bench previously but gave up the ghost so thought i would give the evolution a try and i’ve never looked back. There are a few things wrong but these can be put right, with a little though but apart from the little nigals i’ve been very pleased with the performance.
  6. Good for the money for diy enthusiastic, it’s cutting all kind of types of wood and boards ,metal,plastics as they promised ,wing side benches they could be stronger be careful. When you use it, good start bench saw.
  7. This review is from : Evolution FURY5-S Multi-Purpose Table Saw, 255 mm (230V)

    Good for the money for diy enthusiastic, it’s cutting all kind of types of wood and boards ,metal,plastics as they promised ,wing side benches they could be stronger be careful. When you use it, good start bench saw.
    1. I have been impressed so far really enjoyed using it. I have been impressed so far really enjoyed using it. Only draw back is the fence, it is too flimsy, if you want to make an accurate cut, measure and measure again.
  8. This review is from : Evolution FURY5-S Multi-Purpose Table Saw, 255 mm (230V)

    I have been impressed so far really enjoyed using it. I have been impressed so far really enjoyed using it. Only draw back is the fence, it is too flimsy, if you want to make an accurate cut, measure and measure again.
  9. This review is from : Evolution FURY5-S Multi-Purpose Table Saw, 255 mm (230V)

    Review of evolution fury s-5 saw table. Packingthe saw table arrived adequately packed and sufficiently for the purpose intended. Unpackingall parts required for putting together the table saw were found as required and in sound condition. Unit assemblyapproximately two (2) hours, which is considered satisfactory. Multipurpose bladethe blade provided was found to work very well with wood, plywood, mdf (all of different thickness). Table extensions and support strutsthe table extensions and their support struts were found easy to assemble. Application of weight on the extensions resulted in deformation where the supports are bolted. Care has to be taken to ensure that the extensions are level with the main table. Leg set, cross braces and rubber feetthe legs, cross braces and rubber feet were very easy to assemble. Blade guard with extraction portthe blade guard was found not to lift when the board to be cut came in contact with it, so it had to be arranged above the board to achieve an uninterrupted cut.
  10. This review is from : Evolution FURY5-S Multi-Purpose Table Saw, 255 mm (230V)

    Review of evolution fury s-5 saw table. Packingthe saw table arrived adequately packed and sufficiently for the purpose intended. Unpackingall parts required for putting together the table saw were found as required and in sound condition. Unit assemblyapproximately two (2) hours, which is considered satisfactory. Multipurpose bladethe blade provided was found to work very well with wood, plywood, mdf (all of different thickness). Table extensions and support strutsthe table extensions and their support struts were found easy to assemble. Application of weight on the extensions resulted in deformation where the supports are bolted. Care has to be taken to ensure that the extensions are level with the main table. Leg set, cross braces and rubber feetthe legs, cross braces and rubber feet were very easy to assemble. Blade guard with extraction portthe blade guard was found not to lift when the board to be cut came in contact with it, so it had to be arranged above the board to achieve an uninterrupted cut.
  11. This review is from : Evolution FURY5-S Multi-Purpose Table Saw, 255 mm (230V)

    Cuts through wood like butter, the only down side is the edging. Cuts through wood like butter, the only down side is the edging guide, its only half the length of the table, but easy to over come, once you set the guide just clamp a length of wood behind it, already cut 18mm mdf and some solid woods plus ply sheets, spot on every time, the fine blade and the speed it runs limits almost all rip out,.
  12. This review is from : Evolution FURY5-S Multi-Purpose Table Saw, 255 mm (230V)

    Cuts through wood like butter, the only down side is the edging. Cuts through wood like butter, the only down side is the edging guide, its only half the length of the table, but easy to over come, once you set the guide just clamp a length of wood behind it, already cut 18mm mdf and some solid woods plus ply sheets, spot on every time, the fine blade and the speed it runs limits almost all rip out,.
  13. This review is from : Evolution FURY5-S Multi-Purpose Table Saw, 255 mm (230V)

    Item arrived with pieces missing. I had to source them myself. The product is good but the web page should have stated that there was no warranty with this item as it was not new.
  14. This review is from : Evolution FURY5-S Multi-Purpose Table Saw, 255 mm (230V)

    Item arrived with pieces missing. I had to source them myself. The product is good but the web page should have stated that there was no warranty with this item as it was not new.
  15. This review is from : Evolution FURY5-S Multi-Purpose Table Saw, 255 mm (230V)

    Have used this a few times now and it is proving to be a very versatile and impressive machine. Was concerned it might be a bit of a ‘toy’ for the price, but definitely not. I have used it to cut 2 x 240 x 120cm ply boards into planks to make shelving for my workshop. Then used it to trim pine boards to 2cm to make edges for the shelves – made both jobs very easy. Have cut the best tenon joints i have ever managed and, along with a router table bought at the same time, have almost finished making a replacement sash windowvery impressed – i bought an evolution hand held circular saw a few months prior – it has the same blade and is equally impressive. Only downside – as others have noted – is the flimsy fence – fine for light work (like the pine strips) but for heavier jobs, a piece of aluminium angle and a couple of clamps sorted it out. Also light enough to be easily moved by one person – i keep in out of the way in the tool store and move it into the ‘limited space’ workshop as and when needed.
    1. Have used this a few times now and it is proving to be a very versatile and impressive machine. Was concerned it might be a bit of a ‘toy’ for the price, but definitely not. I have used it to cut 2 x 240 x 120cm ply boards into planks to make shelving for my workshop. Then used it to trim pine boards to 2cm to make edges for the shelves – made both jobs very easy. Have cut the best tenon joints i have ever managed and, along with a router table bought at the same time, have almost finished making a replacement sash windowvery impressed – i bought an evolution hand held circular saw a few months prior – it has the same blade and is equally impressive. Only downside – as others have noted – is the flimsy fence – fine for light work (like the pine strips) but for heavier jobs, a piece of aluminium angle and a couple of clamps sorted it out. Also light enough to be easily moved by one person – i keep in out of the way in the tool store and move it into the ‘limited space’ workshop as and when needed.

Comments are closed.