Clarke Belt/Disc Sander 1″x 30″ Belt 5″ Disc Cbs1-5 – Review of machine.

Very first class servicebetter than i expected. I will be recommending this to mates.

Sanding has grow to be a lot a lot easier and this sander saves you a great deal of house, its light-weight adequate to go about, got some more belts and disc sander but so much the originals still going powerful. No so effortless to tilt the tables but no challenges so considerably.

Rapidly delivery provider, arrived promptly following buying. A wonderful software to use on huge and tiny initiatives.

  • Very pleased and pleasantly surprised
  • What a great little machine
  • GOOD MACHINE FOR ITS VALUE

Ideal for my daughters dolls property rebuild really superior positive it will do several additional work close to the household many thanks.

Great top quality, much better than envisioned .

Features of Clarke Belt/Disc Sander 1″x 30″ Belt 5″ Disc Cbs1-5

  • 300 Watt, 230V motor, Supplied with an adjustable mitre gauge and fitted with medium grit abrasive belt & disc
  • 1″ x 30″ sanding belt operates at 13.5 metres/sec. Tilts and locks at any angle 0 – 45º
  • 5″ dia. circular sanding disc runs at 2,800rpm, (LWH) 360x280x360mm
  • Workpiece table dimensions – belt 127x127mm, disc 89x178mm (tilts & locks from 0° to 45°)
  • 45mm O/D dust extraction port, (LWH) 360x280x360mm

Use it sanding my carvings,.

I bought this for earning design boats discovered it outstanding, the disc and belt were being very system, very easily transformed however.

Have had mine for some time now and have utilised it at times. The belt equipped is now exhibiting signals of dress in. Now the explanation for the three stars. It is a sturdy and silent device. Yes the switches should be at the entrance and to british basic safety criteria, but the place oh where do you get the sanding belts?. These belts are 30inch which converts to 76. The only one’s i can uncover are 75mm very long and they do not suit. I am not paying out about £3 for a clarke belt. I’m starting to wonder if this purchasing from the world wide web is such a excellent notion. If i experienced gone to a do-it-yourself shop i am absolutely sure i could get belts there as perfectly. It is these kinds of a shame simply because this truly is a fantastic small device.

Rapidly delivery provider, arrived promptly following buying. A wonderful software to use on huge and tiny initiatives.

Great minimal machine – outstanding for small sanding careers. Amazing tiny device – outstanding for smaller sanding jobs. It is effectively produced and very silent. I desire i experienced acquired one particular years back.

Superior device, extremely silent, no vibration. The only negatives are that the belt table doesn’t tilt and the dust from the belt leaks from the bodywork.

Superior device, extremely silent, no vibration. The only negatives are that the belt table doesn’t tilt and the dust from the belt leaks from the bodywork.

The guidance have been not apparent and good quality not as predicted.

Extremely delighted and pleasantly amazed. As for every normal my critique is damaged down into limited and extended versions. Quick reviewpros- fantastic price for money- reasonably well created with a small fettling- equipped abrasives of remarkably excellent excellent- significantly far more potent than i imagined it would be and i am pretty major handed and only stalled the motor the moment when fairly significantly leaning all of my eighteen stone body on the workpiece- lightweight / moveable measurement for bench prime use but still significant ample to take care of most jobscons- dust extraction port does not fit my shop vac, dust extractor or frequent vac even when i tape the dust extractor hose on with a limited seal it won’t feel to do a full ton- plastic tightening handles for tables adjustment too lengthy had to minimize just one back again with a hacksaw- appreciable volume of fettling to get strip sander desk precisely ninety levels which include have to take a angle grinder to the adjustment bolt that sits underneath the desk (not the adjustment screw / take care of) because it was either poorly finished / slash or was just as well longlong reviewat ninety quid with free postage i really wasn’t expecting a lot supplied the selling price of document ability and other brands but owning applied larger clarke equipment of various varieties in a friend’s skilled workshop i thought i would give them a go and hope they hadn’t just loaned their identify to a lesser model like a lot of other device makers (stanley i am hunting at you). I am satisfied to report for the most portion i am delighted with my acquire and in the very last a few months of rather large household workshop use it has carried out exceptionally very well even a lot more so for it can be price range cost. Out of the box i experienced a tiny fettling (modifying) to do to get it doing work appropriate which isn’t automatically unusual with much less expensive applications. Initially of both of those the strip and disc sander tables occur with plastic taken care of adjustment bolts which keep the tables at whatever degree you want them at however on the strip sander table for me to get the table at a 90 degree angle i experienced to reduce 50% of the cope with absent with a hacksaw as it wouldn’t convert as considerably as what it necessary to without the need of catching on the motor housing. Also on the underside of the strip sander table there is a adjustable assistance bolt which allows to prop the table up by resting on the physique of the equipment. The bolt was both far too extensive or poorly slash off / concluded but possibly way it was only allowing the desk to get to about 88 levels and i did not want a two diploma chamfer on anything so the offending bolt was tamed with a angle grinder which then authorized for the table to be completely square. There is two dust extraction ports relying on which section of the device you are applying unfortunately the two of them are a off dimensions and neither my store vac, regular vac or dust extractor equipped it so created do by taping the dust extractor hose onto it developing a very tight seal with gorilla tape but failed to make substantially distinction consider it can be not significantly well built no matter of the size of the port. The machine is essentially very impressive for all it really is sizing and 300w motor i again wasn’t expecting substantially and once again i was pleasantly amazed it performs incredibly well even with my 18 stone ballerina like contact.

Not as big as i was expecting but incredibly fantastic. Not as significant as i was anticipating but operates incredibly very well. Superior items – its nice and stable , minor assembly essential , arrives with rubber ft or holes to bolt it down , motor velocity is excellent ,probable to stall but only if you are extreme with it , dust elimination is excellent. Not so fantastic – not a lot really , using the belt there is a confined area driving before you foul the uptight so undercutting is a little bit of a dilemma on for a longer time jobs , the round sanding pad is not as massive as i thought it would be ( my fault for not reading through the blurb ). All round , very excellent little bit of kit.

Good introduction to belt grinding. This is my very first belt grinder and i bought it for knife producing. So significantly it has tested able on o-1 instrument steel. Prosits an entry-level belt sander for beneath £100, what is there not to likethe vendor is trustworthy. It does what it says on the tinits not that noisyrequires little assembly, and you will be startedas an instance: i experienced a metal part of knife body to grind out, which would take me 15-twenty minutes. With this it took 5 minutes, no bodily hard work, and was a smoother curve. If it works for 6 months its paid for itself lots of situations around. Consit is crafted for wooden not metallic. As one more evaluation said, acquiring the platforms really at appropriate angles is a hassle. Undoubtedly get a little suitable angle to genuine it up.

Performs as predicted and appears great quality for a pretty fantastic price tag. Perfect for the diyer, you wiil need spare sanding pads/belt.

Is built for wood, yes, but with zirconium sanding belts is quiet excellent to grind steel. This equipment as i have browse is that have far more power in comparison with other identical designs, this have 300w when the other designs supply about 230w, which is why i decided for the clarke modeleasy to mount the machineeasy to alter the belt. Quick to useonly i do not like that is not achievable to install sanding belts considerably less than 60 grain, genuinely is achievable to set up, but not function the device simply because the belt is in get in touch with with the structure of the equipment. For engineers of clarke and other models say that can be a excellent strategy earning a silent significant a person with very best attributes for some additional funds, would be pretty nicely accepted by fans of diy.

I was pleased with this item it does what i want in. I was happy with this products it does what i want in my store and it is a person of a number of sanders i have have from handheld electrical kinds to manual sanders. Hence, with my restricted area and its functions are the perfect marriage. This is addition to the utility it delivers me. I propose it and if you make a decision to invest in it get some spare sanding belts given that some complain about absence of availability.

Sanding has grow to be a lot a lot easier and this sander saves you a great deal of house, its light-weight adequate to go about, got some more belts and disc sander but so much the originals still going powerful. No so effortless to tilt the tables but no challenges so considerably.

Propose this solution and seller.

I had been waiting for this for what appeared like weeks when in precise fact it was only times. When it arrived i was like a kid at christmas untill i attempted to place a person of the table rests on and uncovered that there was no thread on the machine itself. . But i am a resourcefull tiny bugger, i acquired my tap and die established out, situated the suitable size faucet and proceeded to faucet out the hole in question. Within ten minutes i was performed and all is working fine. All i have to do now is invest in some spare sanding discs.

Not as much energy as i thought, have to have to spend in anything even bigger.