Bosch PBS 75 A Belt Sander : Great sander for under £100

The belts are quick and easy to change; i used about 1 per 1. 5 sq m (life’s too short to get that last 10% out of a belt). The front handle can be unscrewed for getting nearer edges, although this is presumably not recommended. What is certainly not recommended is checking sandpaper roughness with one hand whilst accidentally switching the thing on with the other. I did look down to see if my finger was still there, which it was.

I have to say, the first words out of my mouth when opening this was “that’s bad ass”it feels a bit like a mosnter, and i hope it lasts as long as the legends of monsters, i have a lot to do over the next few months with it so i will update if my opinion changes. The instructions are kinda crap in some ways and there was no information on which direction the screw is meant to turn for adjustments, so i tore up about 5mm of the first belt on on side before figuring that out. So far all i have done is sand the living crap out of an 8″x3″ beam that i will be using to suspend gym rings and boxing bag from. It took about an hour or maybe a touch more each side but the wood was very very rough to begin with. I probably took 3mm all four edges from it in that time. It tears up corners much more quickly than you might expect so be careful there. I have sharpened up one superbly blunt chisel and one quite blunt cheap but thick 6” kitchen knife also, that was with the installed 80grit belt. Both in less than ten minutes. If you are looking for a way to sharpen steel, this will do the job but i can’t recommend it unless you have some experience otherwise you might destroy your blades.

Bought as a gift and current reports are excellent.

A very good product at a good price.

  • This is a very good quality belt sander which
  • A great Belt Sander
  • he is delighted with it

Bosch PBS 75 A Belt Sander

  • Fitted with the Bosch microfilter system for efficient built-in dust extraction
  • Automatic belt tensioning system makes changing the belt quick and easy
  • Manual belt alignment is not required as the belt is automatically held in the correct work position while sanding
  • Can also be used for stationary work
  • Compact design, improved manageability and handling of the tool

Worth every penny excellent quality.

Excellent purchase, with a great workout to boot when stripping floor .

Having recently taken up up-cycling i bought one of the cheaper silverline products, both of which exploded on me after about 2 hours work. So after a little deliberation chosing between cost and quality, i plumped for the quality product and bought this. The ease at which this thing works is very satisfying, and as many others have commented, let the weight of teh product do the work for you. I have no problem in recomending this to anyone in the diy market. The dust filter although works very well, 10 times better than the cheaper bags with zips. But dont expect to be dustfree if you are using this in your home. The power of the cooling fan blows it everywhere. Yes its noisy, but its a power tool, what would you expect??this is my 5th bosch product over many years, and never have i been let down by them. One last thing, if you think you are buying a product from germany, dont be so nieve. These are made in china as everything is nowadays, but they appear to be keeping good quality control.

Best make good price would buy again.

Bought as a gift and current reports are excellent.

Fault with tension/ belts fall off. I like this sander and have purchase several over the years. My newest one was purchased 18 months ago and now the belts simply fall off due to the tension (adjustment to change the belt) becoming loose. I really don’t want to but another but does anyone know how to repair the tension?.

Very pleased with this sander. My 15 year old black and decker finally gave up the ghost and i needed a replacement (sadly, because if it had lasted another couple of hours i wouldn’t have to get a new one for six months). I have been making planed timber for shelves and cabinets by ripping lengths of 100mmx45mm (what i used to call 2 by 4s) into 45mmx14mm strips and then gluing them together on their thin edges to form 14mm x up to 450mm boards. The table saw doesn’t leave a smooth edge and while you can get one side reasonably flat the other side always has some peaks and troughs that need smoothing off. The severe parts here and there can be planed out but then i have been using the belt sander with 40, then 80 then 120 grit to get the wood really flat. I end up with a pretty good product and from a 2. 4m piece of wood that cost me £5 and can turn out a 2. 5mm planed wood that would have cost me four times that at the store. The cost, of course, is my time, and it is the sanding that takes the most of it.

A very good product at a good price.

This is a brilliant machine, will cope with light to medium work. This is a brilliant machine, will cope with light to medium work. One has to be careful, sanding a 1/2inch plank, soon becomes a 1/4inch plank.

Having recently taken up up-cycling i bought one of the cheaper silverline products, both of which exploded on me after about 2 hours work. So after a little deliberation chosing between cost and quality, i plumped for the quality product and bought this. The ease at which this thing works is very satisfying, and as many others have commented, let the weight of teh product do the work for you. I have no problem in recomending this to anyone in the diy market. The dust filter although works very well, 10 times better than the cheaper bags with zips. But dont expect to be dustfree if you are using this in your home. The power of the cooling fan blows it everywhere. Yes its noisy, but its a power tool, what would you expect??this is my 5th bosch product over many years, and never have i been let down by them. One last thing, if you think you are buying a product from germany, dont be so nieve. These are made in china as everything is nowadays, but they appear to be keeping good quality control.

Woodchip floor joints and beaten. Our woodchip floors had poor joints which showed through the vinyl. We are having a new vinyl so time to try to sort out the floor. Either board over (not practicable due to the doors and time waiting for a joiner), new floors (again time waiting for a joiner) or buy a sander and smooth joints over. The last was the cheapest option and if works we have a sander as well as even floors. What a beast, the joints never stood a chance. This thing is so powerful, hang on when you switch it on. Only hold it, no downward pressure required.

Purchased for my son as christmas gift.

I had been applying one more very well regarded make for yrs but it was not a patch on this bosch sander.

Does as anticipated, couldnt be happier.

This is a quite good excellent belt sander which. This is a extremely great good quality belt sander which has designed-in dust extraction and fast and uncomplicated belt transforming. This belt sander has been built properly and is top quality. The general performance of the belt sander has been efficient and strong. This belt sander can also be made use of for stationary function but you will will need to get the bosch 2608000537 holder for belt sanders which is pricey and designed from rough plastic. You can also purchase the bosch 2607001079 parallel and angle manual which is very helpful and can enable enhance benefits. This instrument and quite a few other equipment have been carefully tested and used to make things out of still left over elements, components i have ordered and outdated undesirable household furniture as perfectly as trade function and d. Y work opportunities (pictures of examples supplied). I have relayed my conclusions via my critique to aid fellow shoppers.

This is a excellent device, will cope with light-weight to medium function. This is a good machine, will cope with light to medium function. One particular has to be cautious, sanding a one/2inch plank, shortly becomes a one/4inch plank.

A single of the most effective instruments i have at any time bought. 1 of the best instruments i have at any time acquired, be conscious on how you use it though it will catch you out if you aren’t thorough.

I have to say, the initial words out of my mouth when opening this was ‘that’s undesirable ass’it feels a little bit like a mosnter, and i hope it lasts as extended as the legends of monsters, i have a large amount to do over the next handful of months with it so i will update if my view improvements. The guidelines are kinda crap in some ways and there was no info on which course the screw is intended to transform for changes, so i tore up about 5mm of the initially belt on on facet ahead of figuring that out. So significantly all i have accomplished is sand the dwelling crap out of an 8’x3′ beam that i will be working with to suspend gym rings and boxing bag from. It took about an hour or maybe a contact much more every single side but the wooden was incredibly pretty rough to start with. I almost certainly took 3mm all 4 edges from it in that time. It tears up corners substantially far more speedily than you could possibly assume so be careful there. I have sharpened up just one beautifully blunt chisel and just one pretty blunt inexpensive but thick 6’ kitchen area knife also, that was with the put in 80grit belt. Both of those in considerably less than 10 minutes. If you are searching for a way to sharpen steel, this will do the job but i are unable to endorse it unless of course you have some practical experience or else you could possibly damage your blades.