Antex Soldering iron replacement bit – 0 : Excellent solder tip

What can you say about it, it changed my. What can you say about it, it changed my outdated a single properly and that lasted 8 several years in consistent use.

Soldering iron replacement bit – . 5mm for antex cs18 iron (1105 bit). Terrific tiny suggestion for soldering.

Soldering iron replacement bit – 0.5mm for Antex CS18,TC50,TCS,SD50 iron (1105 bit)

  • 0.5mm tip for Antex CS18,TC50,TCS,SD50 irons
  • Suitable for Lead-free solder
  • Iron and nickel plated

At previous a solder suggestion that is great for surface area mounted factors. Just a slight touch and they pop off.

Operates on the soldering iron i was purchased as a leaving existing a few years in the past from radio shack british isles (okay, i am a geek).

As described – fast turnaround.

Employed this item currently, its significantly improved to repair a damaged item with is spare portion than to toss it away.

Employed this item currently, its significantly improved to repair a damaged item with is spare portion than to toss it away.

Soldering iron replacement bit – . 5mm for antex cs18 iron (1105 bit). Terrific tiny suggestion for soldering.

Makes soldering a whole lot less difficult. I do a minimal bit of soldering on stripboard for knocking up basic circuits and also crafted 3 dwelling built arduino boards. I have dabbled in electronics earlier and seriously struggled with soldering. I determined to try out a tiny suggestion and bought this 1 – what a change. Most irons arrive with a considerably bigger elliptical ended bit which i always found complicated to use on stripboard assignments. This smaller tip is way less difficult to use and i now have no issues with soldering up stripboards and connectors. An additional suggestion i have observed functions is to get a reduced energy iron. I use an 18w alternatively of the popular 40w and this also appears to assistance. Also, make guaranteed your stripbaord is clean. If the coppper has absent boring use a wire pan scourer and some washing up liquid to get it vivid yet again, and try out to preserve your fingers off the copper.

At previous a solder suggestion that is great for surface area mounted factors. Just a slight touch and they pop off.

Operates on the soldering iron i was purchased as a leaving existing a few years in the past from radio shack british isles (okay, i am a geek).

As described – fast turnaround.

Makes soldering a whole lot less difficult. I do a minimal bit of soldering on stripboard for knocking up basic circuits and also crafted 3 dwelling built arduino boards. I have dabbled in electronics earlier and seriously struggled with soldering. I determined to try out a tiny suggestion and bought this 1 – what a change. Most irons arrive with a considerably bigger elliptical ended bit which i always found complicated to use on stripboard assignments. This smaller tip is way less difficult to use and i now have no issues with soldering up stripboards and connectors. An additional suggestion i have observed functions is to get a reduced energy iron. I use an 18w alternatively of the popular 40w and this also appears to assistance. Also, make guaranteed your stripbaord is clean. If the coppper has absent boring use a wire pan scourer and some washing up liquid to get it vivid yet again, and try out to preserve your fingers off the copper.

What can you say about it, it changed my. What can you say about it, it changed my outdated a single properly and that lasted 8 several years in consistent use.

One thought on “Antex Soldering iron replacement bit – 0 : Excellent solder tip

  1. What can you say about it, it replaced my. What can you say about it, it replaced my old one perfectly and that lasted eight years in constant use.
    1. What can you say about it, it replaced my. What can you say about it, it replaced my old one perfectly and that lasted eight years in constant use.
  2. This review is from : Soldering iron replacement bit – 0.5mm for Antex CS18,TC50,TCS,SD50 iron (1105 bit)

    Used this item today, its much better to repair a broken item with is spare part than to throw it away.
    1. Used this item today, its much better to repair a broken item with is spare part than to throw it away.
  3. This review is from : Soldering iron replacement bit – 0.5mm for Antex CS18,TC50,TCS,SD50 iron (1105 bit)

    Soldering iron replacement bit – 0. 5mm for antex cs18 iron (1105 bit). Great little tip for soldering.
    1. Soldering iron replacement bit – 0. 5mm for antex cs18 iron (1105 bit). Great little tip for soldering.
      1. Makes soldering a lot easier. I do a little bit of soldering on stripboard for knocking up simple circuits and also built three home made arduino boards. I have dabbled in electronics previously and really struggled with soldering. I decided to try a small tip and bought this one – what a difference. Most irons come with a much bigger elliptical ended bit which i always found difficult to use on stripboard projects. This smaller tip is way easier to use and i now have no problems with soldering up stripboards and connectors. Another tip i have found works is to get a lower power iron. I use an 18w instead of the common 40w and this also seems to help. Also, make sure your stripbaord is clean. If the coppper has gone dull use a wire pan scourer and some washing up liquid to get it bright again, and try to keep your fingers off the copper.
  4. Makes soldering a lot easier. I do a little bit of soldering on stripboard for knocking up simple circuits and also built three home made arduino boards. I have dabbled in electronics previously and really struggled with soldering. I decided to try a small tip and bought this one – what a difference. Most irons come with a much bigger elliptical ended bit which i always found difficult to use on stripboard projects. This smaller tip is way easier to use and i now have no problems with soldering up stripboards and connectors. Another tip i have found works is to get a lower power iron. I use an 18w instead of the common 40w and this also seems to help. Also, make sure your stripbaord is clean. If the coppper has gone dull use a wire pan scourer and some washing up liquid to get it bright again, and try to keep your fingers off the copper.
    1. At last a solder tip that is perfect for surface mounted components. Just a slight touch and they pop off.
      1. At last a solder tip that is perfect for surface mounted components. Just a slight touch and they pop off.
  5. This review is from : Soldering iron replacement bit – 0.5mm for Antex CS18,TC50,TCS,SD50 iron (1105 bit)

    Works on the soldering iron i was bought as a leaving present a few years ago from radio shack uk (ok, i am a geek).
  6. This review is from : Soldering iron replacement bit – 0.5mm for Antex CS18,TC50,TCS,SD50 iron (1105 bit)

    Works on the soldering iron i was bought as a leaving present a few years ago from radio shack uk (ok, i am a geek).

Comments are closed.